CyberData VoIP Paging Gateway

The CyberData VoIP Paging Gateway enables access to existing paging speakers through a VoIP phone system.

The CyberData SIP-enabled Paging Gateway allows the use of legacy analog zone paging amplifiers when converting to a VOIP system. The Gateway is compatible with most SIP-based IP/PBX servers that comply with the SIP RFC 3261. The Gateway is powered via PoE 802.3af - no external power supply is needed.

The CyberData VoIP Paging Gateway enables access to existing paging speakers through a VoIP phone system. The interface is designed to use an existing analog zone controller with a TAM interface and supports paging up to 99 zones from a VoIP phone. The gateway has an FXO port that connects to the FXS port on the zone controller.

Because it is designed to bridge the gap between your old analog equipment with a newer VoiP system, the CyberData VoIP Paging Gateway is the perfect solution for businesses who need a way to incorporate their analog system with their IP system.

The interface is designed to use an existing analog zone controller with a TAM interface and supports paging up to 99 zones from a VoIP phone. The gateway has an FXO port that connects to the FXS port on the zone controller.

The CyberData VoIP Paging Gateway Features at-a-glance:

• SIP RFC 3261 compatible
• For one-way paging systems
• Dual speed 10/100 Mbps
• Configurable DTMF tones to Zone Controller
• Web-based configuration
• Web-based firmware upgradeable
• Power-over-Ethernet (PoE 802.3af)enabled
• Connector for optional external power supply (not included)
• Small footprint
• IGMP