NEC Aspire Cordless II and Cordless II Lite Cordless Phone Manual

How to Install & Program the NEC Aspire Cordless II and Cordless II Lite Cordless Phone Manual.

NEC Aspire Cordless II and Cordless II Lite Cordless Phone Manual

	Download

Excerpts

NEC Aspire Cordless Programming Mode . . .
1. At the same time, press and hold
then press TALK.
• ‘F1=LK01’ shows in the display and the
F1 LED flashes red.
2. Press MUTE to select the function/line key
to program.
• LK01 - LK04 and Off-Hook Ring.
3. Press R/VOL repeatedly to scroll options
for each line key.
• LK01 - LK16. Use the Aspire programming
to define keys for any feature use.
4. Press TALK to exit programming mode.
• When initially installed, the 4 function
keys default to line keys 1-4 respectively
and off-hook ringing defaults to ON.
Programming the Redial Key to Activate the
Cordless Phone . . .
This option can only be used on the Cordless II.
1. Make sure the Base Unit is in DESK mode.
If the DESK LED is not lit, press DESK
button on the Base Unit.
2. Remove the battery.
3. Press and hold on the handset at
the same time.
4. Install the battery while pressing these keys.
5. After the handset beeps, release the keys.
The phone is now in the setup mode.
6. Press HOLD to display the current mode.
The display shows ID 0BD1 DIGITAL (REDIAL).
7. Press F2 + HOLD.
The display shows DIGITIAL (F8).
8. Press TALK to restore the phone to standby
mode.
• Restore the Redial function by entering
setup mode, pressing F3 and then HOLD.
Program the Cordless
II Phone’s REDIAL key
to switch from the
Aspire phone to the
Cordless
(this key cannot be used
to switch from the
Cordless phone to the
Aspire phone):
Define the four
function keys on the
phone (additional key
setup can also be
done in the system
programming):
Setting Up the Phone
Switching the Active Phone . . .
This option can only be used on the Cordless II.
This must be done when the phones are idle
otherwise an active call will be disconnected.
1. Press either the CORDLESS or DESK button
on the Base Unit.
• The LED on the Base Unit indicates
which phone is currently active.
• If the Cordless phone is active, the time
and date are indicated on its display. If
the Aspire keyset is active, the display
shows “DESK TEL”.
• If programmed, the REDIAL key can be
used to switch from Desk to Cordless
mode only. By default, the REDIAL key
performs the redial function.
Placing an Outside Call . . .
1. Press TALK.
OR
1. Press a programmed line key.
• “AQUIRING LINK” blinks in the display
while trying to connect to the base unit.
The TALK icon appears and the line key
lights when connected.
• If there is no connection to the base unit, an
error tone is heard and “NO SERVICE” is
temporarily displayed on the LCD.
2. Listen for dial tone + Outside number.
• You can have function keys for lines or
line groups.
• If your system is behind a PBX, you may
have to dial 9 before your number.
• To mute a conversation, press the MUTE
key. The TALK icon blinks. The caller
cannot hear you speak. Pressing the
MUTE key again deactivates Mute.
• While talking if the handset cannot receive a
signal from the base unit in approximately
35 seconds, it emits an error tone and goes
to standby mode.
3. To disconnect, press TALK or place the
handset back into the charger.
Press a line key for
quick access:
When the Base Unit
has an Aspire keyset
attached, switch
between the Cordless
and Aspire phones:
Placing Calls
OR
1. Press TALK + + Outside number.
OR
1. Press TALK + + Line
group (1-9 or 001-100) + Outside number.
OR
1. Press TALK + + Line number
(e.g., 005 for line 5) + Outside number.
Calling a Co-Worker . . .
1. Press TALK + Co-worker’s extension number.
• Your call will ring or voice-announce. If
you hear ringing, wait for an answer. If
you hear a beep, begin speaking. Dialing
1 changes mode.
• For your Voice Mailbox, dial ✻8.
• For Paging, dial ✻1 + 0 for All Call or
✻1 + 1-64 for zones.
If your call doesn’t go through . . .

© 1999 2009 2010 Tele Technology. All rights reserved. All Brand Names, Manufacturer Names, Marks and Logos, such as Norstar, Nortel, Avaya, Aastra, BCM, Meridian, displayed on this page are the property of their respective owners. Tele Technology and Tele Technology logo are trademarked. Tele Technology is not in any way affiliated with Nortel Networks or Avaya.