Bogen WB1EZ Wall Baffle Speaker

The Bogen WB1EZ Wall Baffle Speaker is an 8" cone speaker enclosed in a simulated walnut-finished wooden enclosure with a black grille cloth on front. The WB1EZ is a 1-watt single-tap speaker with recessed volume control designed for use in 70V amplifier systems. Designed for easy wall-mount installation, the WB1EZ comes pre-assembled.Bogen WB1EZ Wall Baffle Speaker.

• Features screw terminal connections for fast wire lead connection
• 1W single-tap design
• Works with 70V amplifier outputs
• High intelligibility and efficiency
• Simulated walnut vinyl finish
• Designed for easy wall-mount installation
• 8" cone speaker
• Wooden cabinet
• Recessed volume control

Power Rating (RMS): 1-watt, continuous
Frequency Response: 50 Hz to 12 kHz
Impedance: 4900 ohms (for use on 70V amplifier outputs)
Sound Pressure Level: 95 dB at 4 ft. with a 1-watt input on axis
Dimensions: 9-1/2" W x 9-1/2" H x 5-1/4" D (3-1/4" D @ bottom)

Architect and Engineer Specifications
The surface mounting loudspeaker shall be a Bogen Model WB1EZ, or equivalent, 8" cone-type loudspeaker having a frequency response of at least 50 Hz to 12 kHz.The on axis sound pressure level shall be 95 dB, at least four feet with one-watt input. The loudspeaker shall have a six-ounce ceramic magnet and a 3/4" voice coil. The loudspeaker shall be assembled in a wall baffle for surface-mounting, angled for additional downward sound dispersion. The baffle shall be constructed of 3/8" particle board, glued and covered in simulated walnut vinyl. Glue blocks shall be used to reinforce all side corner joints.The speaker opening shall be covered with a black grille cloth.